Description
INDUSTRIAL VIDEO SUPPLY LLC
WHY BUY FROM US!
- High End Hardware For Commercial Video Security!
- We Specialize in PTZ Cameras And DVRs
- Our Nationwide Network Of Buyers Find The Ultimate Bargains On High End Video
- The Choice of Over 3500 Dealer/Installers-Large Corporations-Government/Military
- Loss Prevention Depts, School Districts, Casinos Serviced Nationwide
- Professional Grade Mil-Spec Quality Products
DEALS ON PTZ
ITEM DESCRIPTION
BRAND NEW
PELCO SPECTRA IV 35x D/N PRESSURIZED ANALOG PTZ SYSTEM
SD435-PRSE0
LIST PRICE $5435
AVERAGE ONLINE PRICE $3440
CALL US Eight Six Four Three Two Eight Nine Eight Nine Eight
- BRAND NEW IN THE 3 FACTORY COMPONENT BOXES GUARANTEED!
- 35x OPTICAL ZOOM CAMERA- DD4CBW35
- PRESSURIZED DOME HOUSING – BB4-PRS-E
- SMOKED LOWER DOME – LD53PR0
3 factory component boxes shipped in a generic outer shipping box
Spectra IV PTZ Camera System
- Pendant Pressurized Back Box
- Pressurized to 8 psig (55 kPa)
- Easy-to-install Smoked Lower Dome
- DD4CBW35 35x Day/Night Camera
- Auto White Balance / Auto Iris
- 9/125μm Single-mode Fiber Cable
- Solid-State Sensors
- On-screen Programmable Menus
- On-screen Alert Modes
- Built-in Back Box Memory
The Pelco Spectra IV SE 35x Pressurized Dome System (Environmental Pendant, smoked Dome) includes an environmental pendant style, pressurized back box, a smoked lower dome with 35x day/night camera and 9/125μm single-mode fiber cable with an ST-type connector. Suitable for industrial, traffic and marine applications, the pressurized dome system delivers high quality video in the harsh conditions.
The camera optics and electronics inside the self-contained, sealed unit are protected from moisture and airborne contaminants. Dry nitrogen pressurized to 8 psig keeps the cartridge free from internal condensation and corrosion. A drop in internal pressure, temperature, or dew point beyond factory-set, acceptable limits causes the sensors in the cartridge to send out an alert. The sensors also allow for instant on-screen display of temperature, pressure, and dew point. The system has on-screen programmable menus for pan/tilt, camera, and sensor alert settings.
The back box is equipped with a sun shroud, heater, and fan to maintain a consistent operating environment. It also includes a built-in memory, an integrated passive UTP circuit, 2 auxiliary outputs, and 7 alarm inputs.
The lower dome has a O-ring seal and stainless steel V-band that has a unique latching system with a captive fastener that makes installation easy. The lower dome trim ring has 2 brass valves – a Schrader valve for system purging and a pressure relief valve.
The DD4CBW35 day/night camera has a 1/4″ EXview HAD image sensor and offers a high resolution of 540TVL. It has a 2:1 interlace scanning system. With the help of 128x wide dynamic range, the camera provides high-quality images even in low light conditions. It has a varifocal lens with a focal length of 3.4-119 mm at f/1.4 and a 35x optical zoom.
Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. Automatic iris control adjusts the amount of light passing through the lens. The AC line lock is used to eliminate timing discrepancies in H/V sync that cause picture interruptions at the switching point.
In addition to image enhancement, it also has an electronic image stabilization that clears vibrations in the camera caused by moving traffic or strong winds.
With the help of 9/125μm single-mode fiber cable with an ST-type connector, Pelco’s FS85011 fiber optic transmission board and third-party fiber optic transmitters can be installed inside the back box.
The system also has a pre-wired cable with nickel-plated steel mating connector that includes all wires for system functionality including power, alarms, auxiliaries, coaxial video, UTP video, and serial control. The back box and lower dome are made of stainless steel, which makes for added protection in harsh environments; the lower dome bubble is made of polycarbonate that makes it temperature resistant and impact resistant. Within 3 hours of starting up, the system can de-ice and be operational from a temperature of -60°F (-51.11°C).
Its stainless steel construction provides added protection in harsh environments. The 0.090″ thick bubble of the lower dome is made of polycarbonate. Within 3 hours of starting up, the system can de-ice 0.1″ and be operational at -60°F (-51.11°C) onwards.
With certifications/ratings such as CE-Class B, FCC-Class B, and UL/cUL-listings, the system also meets NEMA Type 6P and IP67 standards.
- Environmental pendant style, pressurized back box
- Dry nitrogen pressurized to 8 psig keeps the cartridge free from internal condensation and corrosion
- Sun shroud, heater, and fan to maintain a consistent operating environment
- Built-in back box memory, an integrated passive UTP circuit, 2 auxiliary outputs, 7 alarm inputs
- 62.5/125μm multi-mode fiber cable with an ST-type connector to install Pelco’s FS85011 fiber optic transmission board and third-party fiber optic transmitters
- Any drop in pressure, temperature, or dew point beyond factory-set, acceptable limits causes the sensors in the cartridge to send out an alert
- Sensors allow for instant on-screen display of temperature, pressure, and dew point
- On-screen programmable menus for pan/tilt, camera, and sensor alert settings
- Pre-wired cable with nickel-plated steel mating connector that includes all wires for system functionality including power, alarms, auxiliaries, coaxial video, UTP video, and serial control
- Stainless steel construction provides added protection in harsh environments
- Can de-ice and be operational from a temperature of -60°F (-51.11°C) within 3 hours of starting up
- Built-in power line surge and limited lightning protection
- Smoked bubble made of polycarbonate
- O-ring seal and a stainless steel V-band
- Unique latching system with a captive fastener in the V-band makes installation easy
- Trim ring contains 2 brass-constructed valves – a Schrader valve for system purging and a pressure relief valve
- 1/4″ EXview HAD image sensor and 540TVL resolution
- 35x optical zoom
- Varifocal lens with a focal length of 3.4-119 mm at f/1.4
- 2:1 interlace scanning system
- 128x WDR provides high-quality images even in low light conditions
- Electronic image stabilization clears vibrations in the camera caused by moving traffic or strong winds
- Auto-focus feature automatically focuses the camera on to the selected object or area
- Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions
- Automatic iris control adjusts the amount of light passing through the lens
- AC line lock eliminates timing discrepancies in H/V sync that cause picture interruptions at the switching point
PAYMENT
- PayPal payment same day as item ends required
- Contact us if you do not have a PayPal account prior to bidding and w can send you an invoice for payment with your major credit card.
- Other payment options must be approved by the seller before bidding
SHIPPING
3 factory component boxes shipped in a generic outer shipping box. Shipping is $59 We ship outside the U.S.A when you use eBay’s Global Shipping Program! PayPal U.S. verified address required
TERMS
Legal Terms and Conditions. By bidding on this auction, you agree to these terms and conditions. We guarantee the stated condition and description of every item. If you win the auction, you will pay in a timely manor as stated. We describe all items to the best of our ability. We are not responsible for typographical errors or errors in listed specifications or descriptions. Do your own research to verify. Returns for 30 days excepted for non-functioning items only. Not excepted for buyer remorse or wrong item ordered! Must be returned in same new condition. Restock fee may apply.
Please be smart buyers and ask any questions before bidding.
Reviews
There are no reviews yet